Volumetric Filler SA 500

The supply hose of the Volumetric Filler SA is inserted into the product holding container, hopper, tank, etc. Operator will have to prime the filler to remove all air bubbles from the product to ensure a smooth and consistent dispensed volume. 

The operator can adjust the container holder and filling nozzle height to ensure a nozzle is in the center of the opening of the bottle, container, etc. We will match the holder design according to the container the user is using. Having a good adjusted holder and nozzle will allow the operator to easily place the empty containers perfectly under the nozzle each time, allowing the production to be faster.

Next, the operator can opt for the desired volume stick and insert it into the filling machine via the change size selector switch. Changing dispensing volume can be done in under 10 seconds.

Users can start the filling cycle either manually or automatically. In manual mode, there are 2 ways to start; one by pressing the start button on the volumetric filler itself, another via the foot pedal on the floor. Both will activate 1 cycle of the filling process. In automatic mode, the filling cycle will repeat itself after a short interval.

Designed for low viscosity liquid, the dispensing is fast and accurate, it can fill a 330ml bottle in 6 seconds or so. There is an option for additional filling nozzle, making it a double filling nozzle variant.