Pail Filler

The pail filler is first connected to the supply source, after connecting, the user can open a valve to allow the product to flow towards the pail filler.

The user will select the desired filling weight from the indicator and place an empty pail on the load cell. Using the pail guide to ensure the pail is sitting below the filling nozzle and the sensor will detect if there is pail or not. In the absence of a pail, the filling process is unable to start.

For products that tend to foam easily, users can opt for bottom to top filling in which the nozzle will follow very closely to the surface of the product as the product level rises to minimise the occurrence of foaming. There are 2 filling modes available; bottom to top and top filling.

Filling is done in 2 stages; 1st stage at high speed and the 2nd stage at a slower speed to ensure accuracy. The filling nozzle will retract to its home position and the anti drip cover will prevent any messy drips.

After the filling is done, the user can simply move the filled pail to the capping station effortlessly using the roller conveyor.