Volumetric Filler PSA 500

Product is added into the hopper attached to the Volumetric Filler PSA. The user will select the desired filling volume and the filling mode; either automatic or manual, and simply press the start button to run the process. In manual mode, the filling process will run 1 cycle and stop, while in auto mode it will run continuously with a short delay between each cycle. 

The user can opt to start the filling process with the start button or by stepping on the foot switch, either will work. 

The Volumetric Filler works similarly to a syringe; liquid is drawn into the body of the syringe and pushed out as the piston moves. The amount dispensed is indicated by the markings on the body of the syringe. But in the case of the Volumetric Filler, it is determined by the volume stick. Hence it is accurate and consistent in the volume dispensed. 

For products that do not flow well, we recommend adding an agitator to “scrap and push” the product off the sides of the hopper towards the center bottom. 

The design of the Volumetric Filler PSA is suitable for medium to high viscosity products. It can work well with containers, bottles, preformed bags and more.