Auto Bag Fill and Seal (by weight)

The Auto Bag Fill and Seal machine is an automatic filling and sealing machine for preformed bags i.e 3 sides pre-sealed and only 1 side is not. 

The pick and place system will retrieve 1 bag at a time from the bag dispenser. The suction cups will pull one bag out, another set will adhere to the other side to “open” the unseal side of the bag. If the bag orientation is wrong, i.e the sealed side is facing upwards, the pick and place system will reject the bag and proceed to take a new one.

Upon successfully opening the bag, it will position it below the filling nozzle. The filling nozzle will proceed to dispense the product by the preset weight. Once the weight is achieved, it will stop and retract. The clippers on the side will taunt the filled bag to remove as much air as possible. Then it will lift the filled bag upwards to the sealing bars for sealing.

After sealing is done it will be dropped into a holding container, tray or conveyor depending on the setup the user has.